ServicesLight Demolition
Light Demolition in Winters
We take apart the things you want gone, like a sagging deck, an old fence, a dead hot tub or worn-out kitchen cabinets. Then we load it all, haul it off and sweep up. You get photos before, during and after.

Small tear-outs, done and hauled in one visit
Light demolition is the hands-on part of a cleanup. Some things won't fit through a door or into a truck until they come apart. We bring the pry bars, saws and muscle, break the piece down, and load it out the same visit.
We stick to non-structural work. That means nothing that holds up your home, and no gas, electrical or plumbing work. If a wall carries load or a line runs through what you want removed, we tell you straight and point you to the right trade.
Most homes around Winters have a deck, fence or patio cover that has spent years in dry summer sun and winter rain. When the wood is gray, split and loose at the posts, tearing it out is often cheaper than patching it. We keep you posted on what turns up under the boards and show you what we left behind.

What we tear out and take away
- 01
Decks and patio covers
We pull decking, joists, railings and steps, and cut the posts at grade or dig them out if you want the footings gone. Nails and screws get picked up with the wood.
- 02
Fences and gates
Wood, chain-link and old wire fencing. We pull the panels, cut or pull the posts, and leave a clean line where the fence stood.
- 03
Hot tubs and spas
We cut the shell and cabinet into pieces small enough to carry out. You or your electrician disconnect the power first, and we drain whatever water is left.
- 04
Interior tear-outs
Cabinets, countertops, carpet and pad, old vanities and non-load-bearing drywall. Good for clearing a room before your contractor starts.
- 05
Playsets and outdoor structures
Swing sets, pergolas, small greenhouses and dog runs. If it's a full shed, see our Shed Removal page.
- 06
Haul-away and sweep-up
Every load leaves with us. We sort metal and clean wood for recycling where we can and rake or sweep the work area before we go.
Questions about Light Demolition?
Call(530) 349-5761Signs it's time to tear it out
Soft or rotten deck boards
If a screwdriver sinks into the wood or boards flex underfoot, the framing under them is usually going too. That's a safety issue, not just a looks issue.
A fence that leans
Posts rot at the ground line first. Once several are loose, replacing panels one at a time stops making sense.
A hot tub nobody uses
A dead spa takes up the patio and collects water and pests. Most can't be sold or moved whole, so cutting it up is the practical way out.
Remodel coming up
Your contractor may charge more to do the tear-out themselves. Having us clear the room first can save their time and yours.
Getting ready to sell
A falling-apart deck or patio cover can raise questions at inspection. Removing it cleanly often looks better than a half-fixed one.
How a light demolition job goes
- 1
Phone call and estimate
You tell us what you want gone. We come look, measure and check access, then give you a free, no-obligation estimate with the price up front.
- 2
Check before we cut
We confirm power, water and gas are off where needed and mark anything that stays, like sprinkler heads or a gate you want to keep. We take before photos of the whole area.
- 3
Take it apart
We break things down in a set order so nothing falls where it shouldn't. If we find something unexpected, like hidden rot or old wiring, we stop, show you and talk it through before going further.
- 4
Load, haul and clean up
Debris goes straight into our truck. We pick up nails, sweep or rake, and send you after photos so you can see exactly how we left it.
What sets the price
We price light demolition after we see the job, and we tell you the number before work starts. Upfront pricing, no surprises. Most of the cost comes down to how long it takes to take apart and how much ends up in the truck.
- Size and amount of material
- A 10-by-12 deck is a different job from a wraparound one. More material means more labor and more disposal.
- How it was built
- Posts set in concrete, extra fasteners or heavy framing take longer to remove than a simple screwed-together build.
- Access
- A backyard we can reach through a wide gate goes faster than one where everything is carried through the house or down a narrow side yard.
- Type of debris
- Clean wood and metal often recycle. Mixed materials, concrete footings or a fiberglass spa shell cost more to dispose of.
Light demolition questions
Do I need a permit to tear out a deck or fence?
Many small tear-outs don't need one, but rules vary by city and county. If we think your job might, we'll say so at the estimate so you can check with the building department before we start. We won't guess for you on something that matters.
Can you take out a wall?
Only if it doesn't hold anything up and has no wiring or plumbing in it. We don't do structural work. If we're not sure, we'll ask you to have a contractor look first.
What about older materials like asbestos or lead paint?
Some older flooring, ceiling texture and paint can contain them. We don't disturb material we suspect until it's tested. If we see something that looks off, we stop work on that spot and tell you right away.
Will you leave the concrete footings?
Your call. We can cut posts flush with the ground or dig the footings out. Pulling footings takes more time and adds weight to the load, so it shows up in the estimate.
How do I know what you did?
We send photos before, during and after. If we found rot, a buried pipe or anything else worth knowing, it's in the pictures so you're not taking our word for it.
Do you work outside Winters?
Yes. We take light demolition jobs in Vacaville, Davis, Dixon, Esparto and Woodland too. Give us a call and tell us where you are.

Got something that needs to come down?
Describe the deck, fence or spa you're done with. We'll walk the job with you, settle on a firm number before anything gets pulled apart, and leave the spot swept when we're finished.